Click image to view full size image
Spiral full cone spray nozzles are designed to provide a full cone spray pattern
without the restriction of an internal vane. By positioning the "vane" outside the
nozzle, the maximum free passage - or the ability to pass solids - can be increased.
This feature makes the spiral full cone nozzles especially well suited for applications
where solids may be present in the liquid being sprayed. For example, recirculated
washing water, or some chemical scrubbing applications using slurries. The clog
resistance provides performance reliability in critical applications such as fire
suppression and prevention, where nozzles are inactive most of the time, but when
activated the must operate without fail, even with dirty water.
Design features:
SPB nozzle are hollow/full cone with spraying angle from 60° to 170°
Under 3 bar pressure, the flowing rate of liquid is 5.5-4140 L/min
It has an expedite flow channel design, which can decrease liquid barrier for maximal capacity with certain size
Spiral spray nozzle can be installed or replaced in lots of pipe system
NPT/BSPT (male) thread are provided
The common 1/4-2-inch nozzles are made of brass, SS316, Teflon, or PVC
Other selective materials can be used for special application
Common application:
Exhaust gas filtration
Gas cooling
Washing and rinsing
Fireproofing and fire extinguisher
without the restriction of an internal vane. By positioning the "vane" outside the
nozzle, the maximum free passage - or the ability to pass solids - can be increased.
This feature makes the spiral full cone nozzles especially well suited for applications
where solids may be present in the liquid being sprayed. For example, recirculated
washing water, or some chemical scrubbing applications using slurries. The clog
resistance provides performance reliability in critical applications such as fire
suppression and prevention, where nozzles are inactive most of the time, but when
activated the must operate without fail, even with dirty water.
Design features:
SPB nozzle are hollow/full cone with spraying angle from 60° to 170°
Under 3 bar pressure, the flowing rate of liquid is 5.5-4140 L/min
It has an expedite flow channel design, which can decrease liquid barrier for maximal capacity with certain size
Spiral spray nozzle can be installed or replaced in lots of pipe system
NPT/BSPT (male) thread are provided
The common 1/4-2-inch nozzles are made of brass, SS316, Teflon, or PVC
Other selective materials can be used for special application
Common application:
Exhaust gas filtration
Gas cooling
Washing and rinsing
Fireproofing and fire extinguisher